Centrifugally Cast Reformer Tubes and Ethylene Cracking Coils

Manufacturer of Centrifugally Cast Reformers Tube Assemblies for use in Ammonia, Hydrogen and Methanol, Syngas Plants, Pyrolysis Cracker Coils for Ethylene Units and Pre-Heat coils for Direct Reduction iron ore plants in proven materials including HPNb modified, Micro-alloy and 35/45 CR/NI materials. Paralloy also manufactures Paralloy Ethylene Profiled tubes (PEP) for cracker coil applications, where internal fins are machined using electro chemical machining techniques, to increase heat transfer area of the tube and thereby increases the capacity of the tube/coil.

Paralloy Ltd. also manufactures static cast fittings, inlet / outlet headers and pigtails, as well as vertically spun centrifugally cast fittings.

This email address is being protected from spambots. You need JavaScript enabled to view it. | Company website

Static Mixers and Coolers

Primix based out of The Netherlands is a leading manufacturer of Static Mixers and Heat exchangers for special applications in Viscous liquids like Polymers:

• Cools polymer to constant temperature in PET spinning mill input
• Cooling of hot melts
• Heating

Nutrition for - Mild heating and cooling

This email address is being protected from spambots. You need JavaScript enabled to view it. | Company website

Membrane recovery units for Gas Separation

Eurofi lm have developed the customer-oriented, value-added and Membrane-based Skid process solutions for natural gas, refi nery, petrochemical, coal chemical industry and emission control.Through the supply of quality membrane, module, equipment package, system and service, we specialize in separation of gases by using membranes in following fields: Natural Gas, Refinery, Petrochemical, Coal based
Chemical Process and Emission Control

This email address is being protected from spambots. You need JavaScript enabled to view it. | Company website

Soot Blowers, Hydro Jets for Furnace Water Cleaning,

Sentry Series Soot blower Control Systems, and Comprehensive Intelligent Soot blowing Systems. Diamond Power Specialty designs soot blowers with advanced features like Progressive Helix Mechanism (PHM) for positive indexing, power train which eliminate chain drive and completely dry gear type which requires no lubrication. The specialty features include Gemini nozzle for high impact of steam. The IK 500 series range soot blowers travels up to 18.5 meters and ensures complete boiler cleaning. The range includes Stationary (Rotary), Long Retractable soot blowers.

In addition to Long Retractable “IK” soot blowers, and Furnace “IR” Wall blowers, which provide powerful online cleaning using steam. Diamond Power also provides Hydro Jet systems for furnace water cleaning. Hydro Jet technology delivers a coherent water stream to the furnace wall to remove tenacious slag deposits that traditional cleaning equipment may not reliably remove.

This email address is being protected from spambots. You need JavaScript enabled to view it. | Company website

Diagnostic Equipment and CCTV Systems

Offering state-of-the-art CCTV systems to have remote viewing of furnace operations in power Plants, Pulp & Paper, Steel, Glass and Cement industries.

The special feature of the CCTV systems is the in-built Optical Zoom control and Electronic shutter which will enable you to get pictures even in smoky and dusty conditions inside the boiler.

The product range includes

• Optical Pyrometer Gas Temp to detect temperature inside the boiler
• Port Rodders - customized Port Rodders to fit air ports on Recovery Boiler of all makes
• CAMROD for Smelt Bed Cameras
• SPRAYROD for Liquor guns
• Diagnostic Equipment
• High Temperature Imaging Cameras for all types of combustion processes
• Carryover Monitoring Systems for Recovery Boilers
• Gastemp™ Optical Pyrometers, a tool for gas temperature measurement
• Acoustic Pyrometer. Accurate, Real-Time, Gas Temperature Measurement
• Acoustic Monitoring System for Leak Detection on Boilers

This email address is being protected from spambots. You need JavaScript enabled to view it. | Company website

Turbine Isolation and Gate Globe Check Valves for Power Plants

Persta is a leading German supplier of High Pressure Gate, Globe Control and Check valves in the pressure range of PN 10 to PN 630 and the size range of DN 6 to DN 800. And have applications in Isolation of boiler and turbines.

Persta was merged with Siepmann-Werke GmbH & Co., a reputed Forging Plant.

Persta valves meet the International Standards CEN, DIN, ISO, ANSI, AFNOR, and BS inelected segments. Small Globe Valves, Globe, Gate, Lift and Swing type Check valve with Electric / Pneumatic / Hydraulic piston actuated valves. The valves are widely used in pressure vessels, Chemical and petrochemical industry, Thermal and Nuclear Power Plants, Incinerators and LNG tankers.

This email address is being protected from spambots. You need JavaScript enabled to view it. | Company website

Duct & Chimney Linings

Hadek use a system that is specially designed for the internal protection of power station chimneys and flue gas ducts. Hadek provides its services to utilities (Power Plants) which use coal, oil or lignite fi ring in power stations.

It is especially suitable where flue gas desulphurization (FGD) systems are installed. The Pennguard® Block Lining System is based on closed-cell borosilicate glass technology. The system forms an impermeable, acid-resistant barrier inside the chimney fl ue.

Pennguard® chimney linings are installed on the inside of new and existing FGD and non-FGD power plant chimneys and ducts. Pennguard® chimney linings are designed to last for decades under a wide range of operating conditions, including FGD wet stack operation, and are virtually maintenance free.

Power plants around the world have used Pennguard® chimney linings successfully under a wide range of operating conditions - even in seismic regions.

Hadek supplies the Pennguard® Block Lining System with a full on site QA inspection service and a long term guarantee. A well installed Pennguard® lining will help to maximize the long term availability and minimize the running cost of your power plant chimney.

This email address is being protected from spambots. You need JavaScript enabled to view it. | Company website

Valves for Chlorine and Toxic Fluids

Manufacturers of Bellow Sealed Valves for wet / dry Chlorine applications.

Approved by Chlorine institute and Eurochlor.

Range includes High Temperature Valves, 3-2 way jacketed Valves and Angle Valves, Double Sealing Actuated Valves for Liquefied Storage Tanks for toxic applications, such as Cl2, HCL, HF, UF6 COCl2 (Phosgene) VCM, CFC etc.

This email address is being protected from spambots. You need JavaScript enabled to view it. | Company website

OPTIMEX company  in France is specialized in designing and manufacturing API 685 & ISO 15783 Canned Motor Pumps, for chemical, petrochemical, oil & gas and nuclear industries. With more than 800 pump designs successfully installed, OPTIMEX is nowadays a major actor on the international market and continues its ambitious development program in order to complete its range of products, including very innovative canned motor pumps.

This email address is being protected from spambots. You need JavaScript enabled to view it. | Company website

High temperature and Large Diameter Expansion Joints

Pathway manufactures Metal Bellows in compliance with EJMA (Expansion Joint Manufacturer’s Association) standards and other international norms.

Size ranges from 6.4 mm to 13.7 Meters diameter, in shapes that include round, oval, rectangular in single and universal designs for temperature applications upto 1093 Deg C, with pressure up to 276 bar

This email address is being protected from spambots. You need JavaScript enabled to view it. | Company website

FG Valvole , Italy  has new facilities is equipped with the latest technology to manage the complete manufacturing process and supply chain. 40-ton cranes and a set of fully automated test benches allow FGV to perform testing on valves up to 60” with pressure ratings of ANSI 150 to 4.500 and API 2.000 to 20.000.

n designing and manufacturing a wide range of customized high performance valves either manually operated or actuated and for any kind of fluid used in the Oil, Gas, Water, Steam, Petrochemical and Power Generating Industry. Within our own facility, we are currently capable of designing, assembling and testing in accordance with almost all the recognized standards and Customer specifications. FG Valvole range of production includes the use of such unique materials as Super Duplex, Duplex, 6Mo, Monel, Incoloy 825, Inconel and many other alloys. Main production includes Ball, Axial Flow, Gate, Globe and Check Valves in different executions, materials and ratings

This email address is being protected from spambots. You need JavaScript enabled to view it. | Company website

Pumping, Headworks & Treatment Solutions

The company located in USA supplies Vortex based Grit removal and MBR in water treatment for municipal and Industrial use.

This email address is being protected from spambots. You need JavaScript enabled to view it. | Company website

This is the Old OLMI workshop Italy and we can supply welded HE for slurry , Breech locks Heat exchangers, HP Air fin coolers and HP Heat exchangers and WHB from this unit

This email address is being protected from spambots. You need JavaScript enabled to view it. | Company website